View 195D106X9035Z2T_6361735.PDF datasheet online --- IC-ON-LINE

Datasheet File OCR Text:

195d www.vishay.com vishay sprague revision: 08-feb-13 1 document number: 40001 for technical ques tions, contact: tantalum@vishay.com this document is subject to change without notice. the products described herein and this document are subject to specific disclaimers, set forth at www.vishay.com/doc?91000 solid tantalum chip capacitors t antamount ? , conformal coated features ? 8 mm, 12 mm tape packaging to eia-481 reeling per iec 60286-3. 7" (178 mm) standard 13" (330 mm) available ? us and european case sizes available ? mounting: surface mount ? terminations: 100 % tin (2) st andard, tin/lead available ? material categorization: for definitions of compliance please see www.vishay.com/doc?99912 note * lead (pb)-containing terminations are not rohs-compliant. exemptions may apply. performance/electrical characteristics www.vishay.com/doc?40088 operating temperature: - 55 c to + 125 c (above 85 c, voltage derating is required) capacitance range: 0.1 f to 330 f capacitance tolerance: 10 %, 20 % standard voltage rating: 2 v dc to 50 v dc note ? preferred tolerance and reel sizes are in bold. we reserve the right to supply higher voltage ratings and tigh ter capacitance tolerance capacitors in the same case size. ordering information 195d 106 x0 004 s 2 t type capacitance capacitance tolerance dc voltage rating at + 85 c case code termination packaging this is expressed in picofarads. the first two digits are the significant figures. the third is the number of zeros to follow. x0 = 20 % x9 = 10 % x5 = 5 % (special order) this is expressed in volts. to complete the three-digit block, zeros precede the voltage rating. a decimal point is indicated by an r (6r3 = 6.3 v). see ratings and case codes table style 2 is standard 2 = 100 % tin 4 = gold plated 8 = solder plated (60/40) special order t = tape and reel 7" [178 mm] reel standard. for h case size lengthwise w = tape and reel 13" [330 mm] reel available see standard packaging quantity table
195d www.vishay.com vishay sprague revision: 08-feb-13 2 document number: 40001 for technical ques tions, contact: tantalum@vishay.com this document is subject to change without notice. the products described herein and this document are subject to specific disclaimers, set forth at www.vishay.com/doc?91000 note ? the anode termination (d le ss b) will be a minimum of 0.010" (0. 25 mm), c case = 0.005" (0.131 mm) minimum dimensions in inches [millimeters] case code l w h a b c (min.) d (ref.) j (max.) standard case codes c 0.087 max. [2.21 max.] 0.045 0.010 [1.14 0.25] 0.045 0.010 [1.14 0.25] 0.016 0.008 [0.40 0.20] 0.042 0.010 [1.07 0.25] - 0.063 [1.60] 0.004 [0.10] s 0.143 max. [3.63 max.] 0.072 0.008 [1.83 0.20] 0.048 0.008 [1.22 0.20] 0.023 0.010 [0.58 0.25] 0.085 0.015 [2.16 0.37] - 0.114 [2.90] 0.004 [0.10] v 0.143 max. [3.63 max.] 0.104 0.010 [2.65 0.25] 0.051 0.010 [1.30 0.25] 0.023 0.010 [0.58 0.25] 0.085 0.015 [2.16 0.37] - 0.114 [2.90] 0.004 [0.10] x 0.285 max. [7.24 max.] 0.104 0.010 [2.65 0.25] 0.051 0.010 [1.30 0.25] 0.039 0.020 [1.00 0.50] 0.200 0.027 [5.08 0.69] - 0.244 [6.20] 0.004 [0.10] y 0.285 max. [7.24 max.] 0.104 0.010 [2.65 0.25] 0.069 0.010 [1.75 0.25] 0.039 0.020 [1.00 0.50] 0.200 0.027 [5.08 0.69] - 0.244 [6.20] 0.004 [0.10] z 0.285 max. [7.24 max.] 0.104 0.010 [2.65 0.25] 0.104 0.010 [2.65 0.25] 0.039 0.020 [1.00 0.50] 0.200 0.027 [5.08 0.69] - 0.244 [6.20] 0.004 [0.10] r 0.283 max. [7.20 max.] 0.236 + 0.012/- 0.024 [6.0 + 0.30/- 0.60] 0.138 0.012 [3.50 0.30] 0.051 0.012 [1.30 0.30] 0.181 0.025 [4.60 0.60] - 0.244 [6.20] 0.004 [0.10] european case codes a 0.110 0.008 [2.80 0.20] 0.0591 0.012 [1.5 0.30] 0.055 max. [1.40 max.] 0.028 0.012 [0.70 0.30] 0.063 0.012 [1.60 0.30] 0.012 [0.3] -- b 0.165 0.008 [4.20 0.20] 0.055 0.012 [1.4 0.30] 0.063 max. [1.6 max.] 0.031 0.012 [0.80 0.30] 0.098 0.012 [2.50 0.30] 0.012 [0.3] -- d 0.165 0.008 [4.20 0.20] 0.083 0.012 [2.1 0.30] 0.063 max. [1.6 max.] 0.031 0.012 [0.80 0.30] 0.098 0.012 [2.50 0.30] 0.02 [0.5] -- e 0.217 0.012 [5.50 0.30] 0.083 0.012 [2.1 0.30] 0.067 max. [1.70 max.] 0.039 0.012 [1.00 0.30] 0.126 0.012 [3.20 0.30] 0.031 [0.8] -- f 0.197 0.012 [5.0 0.30] 0.130 0.012 [3.3 0.30] 0.079 max. [2.00 max.] 0.039 0.012 [1.00 0.30] 0.142 0.012 [3.60 0.30] 0.031 [0.8] -- g 0.276 0.012 [7.00 0.30] 0.102 0.012 [2.6 0.30] 0.110 max. [2.80 max.] 0.039 0.012 [1.00 0.30] 0.177 0.012 [4.5 0.30] 0.031 [0.8] -- h 0.307 0.012 [7.80 0.30] 0.146 0.012 [3.7 0.30] 0.118 max. [3.0 max.] 0.039 0.012 [1.00 0.30] 0.197 0.012 [5.00 0.30] 0.031 [0.8] -- l a b d ref. w j j h max. max. tantalum wire nib identifie s anode (+) terminal
195d www.vishay.com vishay sprague revision: 08-feb-13 3 document number: 40001 for technical ques tions, contact: tantalum@vishay.com this document is subject to change without notice. the products described herein and this document are subject to specific disclaimers, set forth at www.vishay.com/doc?91000 ratings and case codes f 2 v 4 v 6.3 v 10 v 15 v 16 v 20 v 25 v 35 v 40 v 50 v 0.10 aaa/c 0.15 aaa/c 0.22 s a a b/c/s 0.33 ab/cbb/s 0.47 a a a c b/s b d/v 0.68 a a c b/s d/s d d/v 1.0 a/s b b/c b/s s d/s d e/x 1.5 a c b b/s s d/s e/v e f/x 2.2 a c b/s s d/s e/v f/x f f/y 3.3 a c b/s s d d/s e/v x f/y f g/z 4.7 ab/ssd/see/vxf/xg/zgh/z 6.8 a s d/s e/v x f/x g/y h/z h r 10 a d/s e/v x f f/x y g/y z r 15 e/v x f/x yg/zh/zr 22 x f/x y g g/y/z h/z r r 33 f/x y g/z h h/z r r 47 y g/y h/z r r 68 g/y h/z r r 100 h/z z h/r 120 r r r 150 r r r 180 r r 220 r r 330 r standard ratings capacitance (f) case code part number max. dcl at + 25 c (a) max. df at + 25 c 120 hz (%) 2 v dc at + 85 c, 1.2 v dc at + 125 c 3.3 a 195d335(1)002a(2)(3) 0.5 8 4.7 a 195d475(1)002a(2)(3) 0.5 8 6.8 a 195d685(1)002a(2)(3) 0.5 8 10 a 195d106(1)002a(2)(3) 0.6 8 4 v dc at + 85 c, 2.7 v dc at + 125 c 2.2 a 195d225(1)004a(2)(3) 0.5 8 3.3 c 195d335(1)004c(2)(3) 0.5 6 4.7 b 195d475(1)004b(2)(3) 0.5 8 4.7 s 195d475(1)004s(2)(3) 0.5 6 6.8 s 195d685(1)004s(2)(3) 0.5 6 10 d 195d106(1)004d(2)(3) 0.5 8 10 s 195d106(1)004s(2)(3) 0.5 6 15 e 195d156(1)004e(2)(3) 0.6 8 15 v 195d156(1)004v(2)(3) 0.6 6 22 x 195d226(1)004x(2)(3) 0.9 6 note ? part number definitions: (1) tolerance: for 10 % tolerance, specify x9, for 20 % tolerance, change to x0 (2) termination: for 100 % tin specify 2, for gold plat ed specify 4, for solder plated 60/40 specify 8 (3) packaging code: for 7" reels specify t, for 13" reels specify w
195d www.vishay.com vishay sprague revision: 08-feb-13 4 document number: 40001 for technical ques tions, contact: tantalum@vishay.com this document is subject to change without notice. the products described herein and this document are subject to specific disclaimers, set forth at www.vishay.com/doc?91000 4 v dc at + 85 c, 2.7 v dc at + 125 c 33 f 195d336(1)004f(2)(3) 1.3 8 33 x 195d336(1)004x(2)(3) 1.3 6 47 y 195d476(1)004y(2)(3) 1.9 6 68 g 195d686(1)004g(2)(3) 2.7 8 68 y 195d686(1)004y(2)(3) 2.7 6 100 h 195d107(1)004h(2)(3) 4.0 8 100 z 195d107(1)004z(2)(3) 4.0 8 120 r 195d127(1)004r(2)(3) 4.8 8 150 r 195d157(1)004r(2)(3) 6.0 8 180 r 195d187(1)004r(2)(3) 7.2 8 220 r 195d227(1)004r(2)(3) 8.8 8 330 r 195d337(1)004r(2)(3) 13.2 8 6.3 v dc at + 85 c, 4 v dc at + 125 c 1.5 a 195d155(1)6r3a(2)(3) 0.5 8 2.2 c 195d225(1)6r3c(2)(3) 0.5 6 3.3 b 195d335(1)6r3b(2)(3) 0.5 8 3.3 s 195d335(1)6r3s(2)(3) 0.5 6 4.7 s 195d475(1)6r3s(2)(3) 0.5 6 6.8 d 195d685(1)6r3d(2)(3) 0.5 8 6.8 s 195d685(1)6r3s(2)(3) 0.5 6 10 e 195d106(1)6r3e(2)(3) 0.6 8 10 v 195d106(1)6r3v(2)(3) 0.6 6 15 x 195d156(1)6r3x(2)(3) 0.9 6 22 f 195d226(1)6r3f(2)(3) 1.3 8 22 x 195d226(1)6r3x(2)(3) 1.3 6 33 y 195d336(1)6r3y(2)(3) 2.0 6 47 g 195d476(1)6r3g(2)(3) 2.8 8 47 y 195d476(1)6r3y(2)(3) 2.8 6 68 h 195d686(1)6r3h(2)(3) 4.1 8 68 z 195d686(1)6r3z(2)(3) 4.1 6 100 z 195d107(1)6r3z(2)(3) 6.0 8 120 r 195d127(1)6r3r(2)(3) 7.2 8 150 r 195d157(1)6r3r(2)(3) 9.0 8 180 r 195d187(1)6r3r(2)(3) 10.8 8 220 r 195d227(1)6r3r(2)(3) 13.2 8 10 v dc at + 85 c, 7 v dc at + 125 c 0.22 s 195d224(1)010s(2)(3) 0.5 4 1.0 a 195d105(1)010a(2)(3) 0.5 6 1.0 s 195d105(1)010s(2)(3) 0.5 6 1.5 c 195d155(1)010c(2)(3) 0.5 6 2.2 b 195d225(1)010b(2)(3) 0.5 6 2.2 s 195d225(1)010s(2)(3) 0.5 6 3.3 s 195d335(1)010s(2)(3) 0.5 6 4.7 d 195d475(1)010d(2)(3) 0.5 6 4.7 s 195d475(1)010s(2)(3) 0.5 6 6.8 e 195d685(1)010e(2)(3) 0.7 6 6.8 v 195d685(1)010v(2)(3) 0.7 6 standard ratings capacitance (f) case code part number max. dcl at + 25 c (a) max. df at + 25 c 120 hz (%) note ? part number definitions: (1) tolerance: for 10 % tolerance, specify x9, for 20 % tolerance, change to x0 (2) termination: for 100 % tin specify 2, for gold plat ed specify 4, for solder plated 60/40 specify 8 (3) packaging code: for 7" reels specify t, for 13" reels specify w
195d www.vishay.com vishay sprague revision: 08-feb-13 5 document number: 40001 for technical ques tions, contact: tantalum@vishay.com this document is subject to change without notice. the products described herein and this document are subject to specific disclaimers, set forth at www.vishay.com/doc?91000 10 v dc at + 85 c, 7 v dc at + 125 c 10 x 195d106(1)010x(2)(3) 1.0 6 15 f 195d156(1)010f(2)(3) 1.5 6 15 x 195d156(1)010x(2)(3) 1.5 6 22 y 195d226(1)010y(2)(3) 2.2 6 33 g 195d336(1)010g(2)(3) 3.3 6 33 z 195d336(1)010z(2)(3) 3.0 6 47 h 195d476(1)010h(2)(3) 4.7 6 47 z 195d476(1)010z(2)(3) 4.7 6 68 r 195d686(1)010r(2)(3) 6.8 6 100 h 195d107(1)010h(2)(3) 8.0 7 100 r 195d107(1)010r(2)(3) 10.0 8 120 r 195d127(1)010r(2)(3) 12.0 8 150 r 195d157(1)010r(2)(3) 15.0 8 15 v dc at + 85 c, 10 v dc at + 125 c 0.47 a 195d474(1)015a(2)(3) 0.5 6 0.68 a 195d684(1)015a(2)(3) 0.5 6 1.0 b 195d105(1)015b(2)(3) 0.5 6 1.5 b 195d155(1)015b(2)(3) 0.5 6 3.3 d 195d335(1)015d(2)(3) 0.5 6 4.7 e 195d475(1)015e(2)(3) 0.7 6 10 f 195d106(1)015f(2)(3) 1.5 6 22 g 195d226(1)015g(2)(3) 3.3 6 33 h 195d336(1)015h(2)(3) 5.0 6 16 v dc at + 85 c, 10 v dc at + 125 c 0.47 a 195d474(1)016a(2)(3) 0.5 6 0.68 a 195d684(1)016a(2)(3) 0.5 6 1.0 b 195d105(1)016b(2)(3) 0.5 6 1.0 c 195d105(1)016c(2)(3) 0.5 4 1.5 b 195d155(1)016b(2)(3) 0.5 6 1.5 s 195d155(1)016s(2)(3) 0.5 6 2.2 s 195d225(1)016s(2)(3) 0.5 6 3.3 d 195d335(1)016d(2)(3) 0.5 6 3.3 s 195d335(1)016s(2)(3) 0.5 6 4.7 e 195d475(1)016e(2)(3) 0.7 6 4.7 v 195d475(1)016v(2)(3) 0.7 6 6.8 x 195d685(1)016x(2)(3) 1.0 6 10 f 195d106(1)016f(2)(3) 1.5 6 10 x 195d106(1)016x(2)(3) 1.5 6 15 y 195d156(1)016y(2)(3) 2.3 6 22 g 195d226(1)016g(2)(3) 3.3 6 22 y 195d226(1)016y(2)(3) 3.2 6 22 z 195d226(1)016z(2)(3) 3.3 6 33 h 195d336(1)016h(2)(3) 5.0 6 33 z 195d336(1)016z(2)(3) 5.0 6 47 r 195d476(1)016r(2)(3) 7.1 6 68 r 195d686(1)016r(2)(3) 10.2 6 standard ratings capacitance (f) case code part number max. dcl at + 25 c (a) max. df at + 25 c 120 hz (%) note ? part number definitions: (1) tolerance: for 10 % tolerance, specify x9, for 20 % tolerance, change to x0 (2) termination: for 100 % tin specify 2, for gold plat ed specify 4, for solder plated 60/40 specify 8 (3) packaging code: for 7" reels specify t, for 13" reels specify w
195d www.vishay.com vishay sprague revision: 08-feb-13 6 document number: 40001 for technical ques tions, contact: tantalum@vishay.com this document is subject to change without notice. the products described herein and this document are subject to specific disclaimers, set forth at www.vishay.com/doc?91000 20 v dc at + 85 c, 13 v dc at + 125 c 0.47 a 195d474(1)020a(2)(3) 0.5 6 0.68 c 195d684(1)020c(2)(3) 0.5 4 1.0 b 195d105(1)020b(2)(3) 0.5 6 1.0 s 195d105(1)020s(2)(3) 0.5 4 1.5 s 195d155(1)020s(2)(3) 0.5 6 2.2 d 195d225(1)020d(2)(3) 0.5 6 2.2 s 195d225(1)020s(2)(3) 0.5 6 3.3 e 195d335(1)020e(2)(3) 0.7 6 3.3 v 195d335(1)020v(2)(3) 0.7 6 4.7 x 195d475(1)020x(2)(3) 0.9 6 6.8 f 195d685(1)020f(2)(3) 1.4 6 6.8 x 195d685(1)020x(2)(3) 1.4 6 10 y 195d106(1)020y(2)(3) 2.0 6 15 g 195d156(1)020g(2)(3) 3.0 6 15 z 195d156(1)020z(2)(3) 3.0 6 22 h 195d226(1)020h(2)(3) 4.4 6 22 z 195d226(1)020z(2)(3) 4.4 6 33 r 195d336(1)020r(2)(3) 6.6 6 47 r 195d476(1)020r(2)(3) 9.4 6 25 v dc at + 85 c, 17 v dc at + 125 c 0.33 a 195d334(1)025a(2)(3) 0.5 6 0.47 c 195d474(1)025c(2)(3) 0.5 4 0.68 b 195d684(1)025b(2)(3) 0.5 6 0.68 s 195d684(1)025s(2)(3) 0.5 4 1.0 s 195d105(1)025s(2)(3) 0.5 4 1.5 d 195d155(1)025d(2)(3) 0.5 6 1.5 s 195d155(1)025s(2)(3) 0.5 6 2.2 e 195d225(1)025e(2)(3) 0.6 6 2.2 v 195d225(1)025v(2)(3) 0.6 6 3.3 x 195d335(1)025x(2)(3) 0.8 6 4.7 f 195d475(1)025f(2)(3) 1.2 6 4.7 x 195d475(1)025x(2)(3) 1.2 6 6.8 g 195d685(1)025g(2)(3) 1.7 6 6.8 y 195d685(1)025y(2)(3) 1.7 6 10 g 195d106(1)025g(2)(3) 2.5 6 10 y 195d106(1)025y(2)(3) 2.5 6 15 h 195d156(1)025h(2)(3) 3.8 6 15 z 195d156(1)025z(2)(3) 3.8 6 22 r 195d226(1)025r(2)(3) 5.5 6 33 r 195d336(1)025r(2)(3) 8.3 6 standard ratings capacitance (f) case code part number max. dcl at + 25 c (a) max. df at + 25 c 120 hz (%) note ? part number definitions: (1) tolerance: for 10 % tolerance, specify x9, for 20 % tolerance, change to x0 (2) termination: for 100 % tin specify 2, for gold plat ed specify 4, for solder plated 60/40 specify 8 (3) packaging code: for 7" reels specify t, for 13" reels specify w
195d www.vishay.com vishay sprague revision: 08-feb-13 7 document number: 40001 for technical ques tions, contact: tantalum@vishay.com this document is subject to change without notice. the products described herein and this document are subject to specific disclaimers, set forth at www.vishay.com/doc?91000 35 v dc at + 85 c, 23 v dc at + 125 c 0.10 a 195d104(1)035a(2)(3) 0.5 6 0.15 a 195d154(1)035a(2)(3) 0.5 6 0.22 a 195d224(1)035a(2)(3) 0.5 6 0.33 b 195d334(1)035b(2)(3) 0.5 6 0.33 c 195d334(1)035c(2)(3) 0.5 4 0.47 b 195d474(1)035b(2)(3) 0.5 6 0.47 s 195d474(1)035s(2)(3) 0.5 4 0.68 d 195d684(1)035d(2)(3) 0.5 6 0.68 s 195d684(1)035s(2)(3) 0.5 4 1.0 d 195d105(1)035d(2)(3) 0.5 6 1.0 s 195d105(1)035s(2)(3) 0.5 4 1.5 e 195d155(1)035e(2)(3) 0.5 6 1.5 v 195d155(1)035v(2)(3) 0.5 6 2.2 f 195d225(1)035f(2)(3) 0.8 6 2.2 x 195d225(1)035x(2)(3) 0.8 6 3.3 f 195d335(1)035f(2)(3) 1.2 6 3.3 y 195d335(1)035y(2)(3) 1.2 6 4.7 g 195d475(1)035g(2)(3) 1.6 6 4.7 z 195d475(1)035z(2)(3) 1.6 6 6.8 h 195d685(1)035h(2)(3) 2.4 6 6.8 z 195d685(1)035z(2)(3) 2.4 6 10 z 195d106(1)035z(2)(3) 3.5 6 15 r 195d156(1)035r(2)(3) 5.3 6 22 r 195d226(1)035r(2)(3) 7.7 6 40 v dc at + 85 c, 23 v dc to 25 v dc at + 125 c 0.10 a 195d104(1)040a(2)(3) 0.5 6 0.15 a 195d154(1)040a(2)(3) 0.5 6 0.22 a 195d224(1)040a(2)(3) 0.5 6 0.33 b 195d334(1)040b(2)(3) 0.5 6 0.47 b 195d474(1)040b(2)(3) 0.5 6 0.68 d 195d684(1)040d(2)(3) 0.5 6 1.0 d 195d105(1)040d(2)(3) 0.5 6 1.5 e 195d155(1)040e(2)(3) 0.5 6 2.2 f 195d225(1)040f(2)(3) 0.8 6 3.3 f 195d335(1)040f(2)(3) 1.2 6 4.7 g 195d475(1)040g(2)(3) 1.6 6 6.8 h 195d685(1)040h(2)(3) 2.4 6 50 v dc at + 85 c, 33 v dc at + 125 c 0.10 a 195d104(1)050a(2)(3) 0.5 6 0.10 c 195d104(1)050c(2)(3) 0.5 4 0.15 a 195d154(1)050a(2)(3) 0.5 6 0.15 c 195d154(1)050c(2)(3) 0.5 4 0.22 b 195d224(1)050b(2)(3) 0.5 6 0.22 c 195d224(1)050c(2)(3) 0.5 4 0.22 s 195d224(1)050s(2)(3) 0.5 4 0.33 b 195d334(1)050b(2)(3) 0.5 6 0.33 s 195d334(1)050s(2)(3) 0.5 4 standard ratings capacitance (f) case code part number max. dcl at + 25 c (a) max. df at + 25 c 120 hz (%) note ? part number definitions: (1) tolerance: for 10 % tolerance, specify x9, for 20 % tolerance, change to x0 (2) termination: for 100 % tin specify 2, for gold plat ed specify 4, for solder plated 60/40 specify 8 (3) packaging code: for 7" reels specify t, for 13" reels specify w
195d www.vishay.com vishay sprague revision: 08-feb-13 8 document number: 40001 for technical ques tions, contact: tantalum@vishay.com this document is subject to change without notice. the products described herein and this document are subject to specific disclaimers, set forth at www.vishay.com/doc?91000 50 v dc at + 85 c, 33 v dc at + 125 c 0.47 d 195d474(1)050d(2)(3) 0.5 6 0.47 v 195d474(1)050v(2)(3) 0.5 4 0.68 d 195d684(1)050d(2)(3) 0.5 6 0.68 v 195d684(1)050v(2)(3) 0.5 4 1.0 e 195d105(1)050e(2)(3) 0.5 6 1.0 x 195d105(1)050x(2)(3) 0.5 4 1.5 f 195d155(1)050f(2)(3) 0.8 6 1.5 x 195d155(1)050x(2)(3) 0.8 6 2.2 f 195d225(1)050f(2)(3) 1.1 6 2.2 y 195d225(1)050y(2)(3) 1.1 6 3.3 g 195d335(1)050g(2)(3) 1.7 6 3.3 z 195d335(1)050z(2)(3) 1.7 6 4.7 h 195d475(1)050h(2)(3) 2.4 6 4.7 z 195d475(1)050z(2)(3) 2.4 6 6.8 r 195d685(1)050r(2)(3) 3.4 6 10 r 195d106(1)050r(2)(3) 5.0 6 recommended voltage derating guidelines (for temperature below + 85 c) standard conditions. for example: output filters capacitor voltage rating operating voltage 2.0 1.2 4.0 2.5 6.3 3.6 10 6 15/16 9 20 12 25 15 35 24 40 26 50 28 severe conditions. for example: input filters capacitor voltage rating operating voltage 2.0 1.0 4.0 2.5 6.3 3.3 10 5.0 15/16 7.5 20 10 25 12 35 15 40 20 50 24 standard ratings capacitance (f) case code part number max. dcl at + 25 c (a) max. df at + 25 c 120 hz (%) note ? part number definitions: (1) tolerance: for 10 % tolerance, specify x9, for 20 % tolerance, change to x0 (2) termination: for 100 % tin specify 2, for gold plat ed specify 4, for solder plated 60/40 specify 8 (3) packaging code: for 7" reels specify t, for 13" reels specify w
195d www.vishay.com vishay sprague revision: 08-feb-13 9 document number: 40001 for technical ques tions, contact: tantalum@vishay.com this document is subject to change without notice. the products described herein and this document are subject to specific disclaimers, set forth at www.vishay.com/doc?91000 typical curves at + 25 c, impedance and esr vs. frequency 100 10 1 0.1 fre q uency in hz 100m 10m 1m 100k 10k 1k s ca s e 4.7 f - 10 v dc 1 f - 35 v dc impedance e s r 100 1000 10 1 0.1 fre q uency in hz 100m 10m 1m 100k 10k 1k v ca s e 15 f - 4 v dc 0.47 f - 50 v dc impedance e s r 1000 100 10 1 0.01 0.1 fre q uency in hz 100 10m 1m 100k 10k 1k x ca s e 10 f - 16 v dc 6.8 f - 20 v dc impedance e s r 100 10 1 0.01 0.1 fre q uency in hz 100 10m 1m 100k 10k 1k y ca s e 47 f - 6.3 v dc 22 f - 10 v dc impedance e s r 100 10 1 0.01 0.1 fre q uency in hz 100 10m 1m 100k 10k 1k z ca s e 100 f - 6.3 v dc 4.7 f - 50 v dc impedance e s r
195d www.vishay.com vishay sprague revision: 08-feb-13 10 document number: 40001 for technical ques tions, contact: tantalum@vishay.com this document is subject to change without notice. the products described herein and this document are subject to specific disclaimers, set forth at www.vishay.com/doc?91000 power dissipation case code maximum permissible power dissipation at + 25 c (w) in free air a0.040 b0.050 c0.030 d0.080 e0.090 f0.110 g0.120 h0.140 r0.250 s0.080 v0.095 x0.110 y0.120 z0.135 standard packaging quantity case code units per reel 7" reel 13" reel a2500n/a b2000n/a c 2500 10 000 d2000n/a e2000n/a f 700 n/a g1400n/a h 400 n/a r 600 n/a s 2500 10 000 v 2500 10 000 x 200 10 000 y 1500 7500 z 1500 5000 product information conformal coated guide www.vishay.com/doc?40150 moisture sensitivity www.vishay.com/doc?40135 selector guides solid tantalum selector guide www.vishay.com/doc?49053 solid tantalum chip capacitors www.vishay.com/doc?40091 faq frequently asked questions www.vishay.com/doc?40110
legal disclaimer notice www.vishay.com vishay revision: 02-oct-12 1 document number: 91000 disclaimer all product, product specifications and data are subject to change without notice to improve reliability, function or design or otherwise. vishay intertechnology, inc., its affiliates, agents, and employee s, and all persons acting on it s or their behalf (collectivel y, vishay), disclaim any and all liability for any errors, inaccuracies or incompleteness contained in any datasheet or in any o ther disclosure relating to any product. vishay makes no warranty, repres entation or guarantee regarding the suitabilit y of the products for any particular purpose or the continuing production of any product. to the maximum extent permitted by applicable law, vi shay disclaims (i) any and all liability arising out of the application or use of any product, (ii) any and all liability, including without limitation specia l, consequential or incidental damages, and (iii) any and all i mplied warranties, including warra nties of fitness for particular purpose, non-infringement and merchantability. statements regarding the suitability of products for certain type s of applications are based on vishays knowledge of typical requirements that are often placed on vishay products in generic applications. such statements are not binding statements about the suitability of products for a particular application. it is the customers responsib ility to validate that a particu lar product with the properties descri bed in the product specification is suitable fo r use in a particular application. parameters provided in datasheets and/or specification s may vary in different applications an d performance may vary over time. all operating parameters, including typical pa rameters, must be validated for each customer application by the customers technical experts. product specifications do not expand or otherwise modify vish ays terms and condit ions of purchase, including but not limited to the warranty expressed therein. except as expressly indicate d in writing, vishay products are not designed for use in medical, life-saving, or life-sustaining applications or for any other application in which the failure of the vi shay product could result in personal injury or death. customers using or selling vishay products not expressly indicated for use in such applications do so at their own risk. pleas e contact authorized vishay personnel to ob tain written terms and conditions regarding products designed for such applications. no license, express or implied, by estoppel or otherwise, to any intellectual prope rty rights is granted by this document or by any conduct of vishay. product names and markings noted herein may be trad emarks of their respective owners. material category policy vishay intertechnology, inc. hereby certi fies that all its products that are id entified as rohs-compliant fulfill the definitions and restrictions defined under directive 2011/65/eu of the euro pean parliament and of the council of june 8, 2011 on the restriction of the use of certain hazardous substances in electrical and electronic equipment (eee) - recast, unless otherwis e specified as non-compliant. please note that some vishay documentation may still make reference to rohs directive 2002/95/ ec. we confirm that all the products identified as being compliant to directive 2002 /95/ec conform to directive 2011/65/eu. vishay intertechnology, inc. hereby certifi es that all its products that are identified as ha logen-free follow halogen-free requirements as per jedec js709a stan dards. please note that some vishay documentation may still make reference to the iec 61249-2-21 definition. we co nfirm that all the products identified as being compliant to iec 61249-2-21 conform to jedec js709a standards.

▲Up To Search▲

Price & Availability of 195D106X9035Z2T

	To Download 195D106X9035Z2T Datasheet File
If you can't view the Datasheet, Please click here to try to view without PDF Reader .